Quick Start

<strong>Buy your Bundle</strong>

Buy your Bundle

Or mix and match from our store!

<strong>Spray Away</strong>

Spray Away

Pull the trigger 4 times to start its continuous spray action!

<strong>Refill | Reuse | RepeatTM</strong>

Refill | Reuse | RepeatTM

Refill your sprayer from one of our refills. Just like a great box of wine!

Shop All Products

Using the GOODSprayTM

<strong>Shake Well</strong>

Shake Well

Unscrew the sprayer head from bottle

<strong>Pump to prime</strong>

Pump to prime

Fully squeeze the trigger firmly and quickly 4 times to start the continuous spray

<strong>Spray away</strong>

Spray away

Keep pulling the trigger every second or so to keep the spray going

Shop All Products

Opening the GoodRefillTM

<strong>Step one</strong>

Step one

Gently tear away perforated
tab and bend up

<strong>Step two</strong>

Step two

Pull spout through

<strong>Step three</strong>

Step three

Bend tab down to secure spout

Shop All Products

Refilling your bottle

Unscrew the sprayer head from bottle 

Place bottle under nozzle and squeeze refill nozzle to dispense sunscreen. Fill until sunscreen is about 1" from top of bottle

Replace sprayer head onto bottle and twist until you feel the "click"

Cleaning & Care

Cleaning your GOODSpray™ Sprayer and Bottle 

! DO NOT !put water into the bottle or sprayers as this will react with the water resistant components of the sunscreen and clog the sprayer. Please use 70% Isopropyl Alcohol (Common Rubbing Alcohol) to clean the Bottles and sprayer.

  1. Empty the remaining sunscreen out of the bottle 
  2. Pull trigger until sprayer is cleared of sunscreen 
  3. Fill the bottle with  1" of 70% Isopropyl Alcohol, replace the sprayer and shake for 15 seconds, empty, and repeat 
  4. Fill the bottle with 1" of 70% Isopropyl Alcohol, replace the sprayer and pull trigger 15 times to fully flush the sprayer with alcohol 
  5. Dump the remaining alcohol from the bottle 
  6. Pull trigger until alcohol is cleared from sprayer 
  7. Let dry completely
  1. Remove sprayer head from bottle 
  2. Pull trigger until sprayer is cleared of sunscreen 
  3. Fill Clean cup with 1" of 70% Isopropyl Alcohol 
  4. Place supply tube of sprayer head into alcohol and pull trigger 15 times to flush the sprayer with alcohol 
  5. Remove supply tube from alcohol 
  6. Pull trigger until alcohol is cleared from sprayer 
  7. Let dry completely
  1. Wipe nozzle and surrounding area with clean cloth and 70% Isopropyl Alcohol 

Troubleshooting

  • Check to make sure that the sprayer is unlocked (red dot showing means its locked) 
  • Wipe the nozzle of sprayer with a clean cloth 
  • Run through cleaning procedure, and repeat flushing sprayer with 70% Isopropyl Alcohol until clog has cleared
  • Empty bottle of water and sunscreen and run through cleaning procedure 2x